need help to connect Allen Bradley PLC MicroLogix 1400 over Ethernet Port


Hemendra

Recommended Posts

I am not able to connect Allen Bradley plc model Micrologix 1400 over Ethernet Port. I believe Ethernet Port support DF1 protocol. Cable is ok. Something is wrong to 'Device Configuration' or 'Channel' setting. Please help me or give any sample code.

Link to comment
Share on other sites

DF1 is typically a serial protocol, not Ethernet so I would not be surprised if its not supported on Ethernet.  Double check and also make sure the port is setup on the PLC correctly.

Its impossible to provide a sample because there are so many variants.

Link to comment
Share on other sites

  • 2 weeks later...

Archived

This topic is now archived and is closed to further replies.