PaulSn

I'll turn down the sample rate, should I try to script the read as well?

ok, what do you think about the modbus dropping on the pqube?

ok.. Sorry, I should have mentioned that there are ~5 channels on the LJ that I believe are timed by the sequence and there are ~11 registers being read from the pqube. how would you advise their timing being adjusted. I'll attach the .ctl Thanks! PQUBE GUI.ctl

Hi, This was the exact thread title I was going to use. I have a UE9 and a PSL PQube on a network working with DAQ Factory. I have a "p-Modbustcp 0010: Timeout" Error that comes up sporadically, I haven't figured out why yet. sometimes I lose the PQube for minutes or more at a time to this error, and sometimes it runs fine. the ue9 seems to be ok for the most-part but I have a "C1038 Timing lag, data acquisition stalled. Resetting. Timing: 1.000, Offset: 0.000" That comes up sometimes and seems to repeat every ~20sec. It looks like it occurs when I have lost comms to the PQube. I am using a sequence to get the LJ channels read because of the speed (2khz), but am still using the "channels" to read the registers from the PQube at 1hz.. please advise. Thanks.