JustinTerra

Members
  • Content Count

    2
  • Joined

  • Last visited

Community Reputation

0 Neutral

About JustinTerra

  • Rank
    Newbie
  1. JustinTerra

    Noobie Channel Help

    My issue has been resolved thanks to a coworker and Matt at Azeotech. Thanks again for all the help! Below is the code I used to get our Picarro to talk to DAQFactory. device.Picarro.Purge() While(1) device.Picarro.Write("_Meas_GetConc" + Chr(13)) private string Data_In = device.picarro.readuntil(13) private string Data_Parsed = parse(Data_In,-1,";") private Data_Value = strtodouble(Data_Parsed) Picarro_CavityPressure_Torr.AddValue(Data_Value[0]) Picarro_CavityTemp_C.AddValue(Data_Value[1]) Picarro_WarmBoxTemp_C.AddValue(Data_Value[2]) Picarro_NH3_RAW_ppb.AddValue(Data_Value[3]) Picarro_H2O.AddValue(Data_Value[4]) Delay(.5) EndWhile
  2. Hello All, I have some questions about DAQFactory and I needed some help. I hope this is the correct place to post my question. I was recently asked to start helping out another person in my group and was asked to get DAQFactory to connect to another device that we use called Picarro. I am having a bit of trouble understanding how everything works together as I am very new to DAQFactory and my programming skills come up short. What I am trying to do is take the information (e.g. NH3 data) from the Picarro and display it on a Page. With some help we were able to get the DAQFactory to receive information from the Picarro in the following form: Displayed in the Comm Monitor window (this information is the various data from the Picarro): Tx: _Meas_GetConc\013 Rx: 23.386;23.179;23.153;23.327;0.000;0.708;0.000\010 \013 Displayed in the Command/Alert window: 23.386;23.179;23.153;23.327;0.000;0.708;0.000 {" 23.386", "23.179", "23.153", "23.327", "0.000", "0.708", "0.000 "} 0 This is the code we are using: device.Picarro.Write("_Meas_GetConc" + Chr(13)) Global string Data_In = device.picarro.readuntil(10) ? Data_In Global string Data_Parsed = parse(Data_In,-1,";") ? Data_Parsed Global Data_Value = strtodouble(Data_Parsed[4]) ? Data_Value I created a Channel called Picarro and other channels below that for each item we would like information from the Picarro (e.g. NH3 data, Pressures, Temp, etc.) although I am not sure if I set these up correctly. I could use some advice on how to proceed. Thanks in advance for the help. Justin