Kris Posted April 27, 2007 Share Posted April 27, 2007 Hi, I'm new at this so excuse me if this is already an old question (though i could not find the answer anywhere) I have just purchased a U12 and an EI-1050. They work great the LJSHT program that shipped with it but i can't get any reading in Daqfactory. Exactely how should the channels be configured? Any help would be appreciated! Link to comment Share on other sites More sharing options...
AzeoTech Posted April 27, 2007 Share Posted April 27, 2007 Its actually quite simple. Create a channel with I/O type "Special", channel #0 and set the timing to your desired polling interval. Then create another but channel #1 with a timing of 0. The temperature reading will go into channel 0, and the RH into channel 1. Link to comment Share on other sites More sharing options...
Kris Posted April 27, 2007 Author Share Posted April 27, 2007 Thanks a lot! Works great. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.