joesalerno Posted September 1, 2008 Share Posted September 1, 2008 Hi, is it possible to change the screen size on a complete program thats been wrote? I need to reduce this program as it was drawn on a 19" screen and we require it to run on a 15.4" screen, at present we are only displaying half the screen on the 15.4". Thanks Link to comment Share on other sites More sharing options...
AzeoTech Posted September 1, 2008 Share Posted September 1, 2008 Alas, no. This is on the top of our list for Release 6.0, but for now, you have to create a separate set of screens for smaller screen resolutions as is done in the Municipal Water sample. The easiest way to do this is to make duplicates of each of the pages (edit-select all, then copy and paste to new pages), then just rescale the graphics by hand. There's nothing wrong with having two pages with identical components, but scaled from each other. Link to comment Share on other sites More sharing options...
dchappel Posted September 3, 2008 Share Posted September 3, 2008 Good news on this for 6.0! Link to comment Share on other sites More sharing options...
Ken Posted September 5, 2008 Share Posted September 5, 2008 This is VERY exciting news! The time it will save projects is substantial. As always Azeotech support and willingness to work with clients is astounding. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.