JohanKarlsson Posted January 27, 2009 Share Posted January 27, 2009 I have two U12 LabJacks connected to a computer. I am measuring temperature with a EI1050 on both of them(one with multiple EI1050s). No problems when I run one of the LabJacks but when I access both of them I run into problems. I get tCRC errors and Cannot claim labjack errors. I have plenty of time seconds between the accesses but the problem still occurs. Is this a known problem? The obvious cure is to move the single EI1050 to the other LabJack but this does not fit the application. /Johan Link to comment Share on other sites More sharing options...
AzeoTech Posted January 28, 2009 Share Posted January 28, 2009 I do not know. This is a hardware question that should be directed to the folks at LabJack. The DAQFactory LabJack driver pretty much passes through all the commands directly to LabJack's UD, so most problems need to be addressed to them. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.