mbruck 0 Posted February 8, 2010 Hello! I have problem with Force coil modbus tcp function (5). When I put ordinary button and connect it to Force Coil tcp function channel, it always send xFF in data part. This is same for all type button & Switches, EXCEPT for spin button which send x00 and xFF when push upper and lower part. On attached print screen, first push send xFF and LED is "on" on button, but second push actualy switch off button and LED, but channel show same data is sent to device (and device respond to it)..... Problem. My question is, how to setup, embedded buttons&switches to sent x00 or xFF, and how to do same with simbol factory "buttons" . Regards! Share this post Link to post Share on other sites
AzeoTech 0 Posted February 8, 2010 Please post your .ctl doc. Share this post Link to post Share on other sites
mbruck 0 Posted February 9, 2010 Here it is... test.ctl Share this post Link to post Share on other sites
AzeoTech 0 Posted February 16, 2010 It is not clear to me what you are trying to demonstrate in this sample. It is just a couple of LED's and input channels. Perhaps you posted the wrong file? Share this post Link to post Share on other sites
