wejsmith Posted June 11, 2010 Share Posted June 11, 2010 While developing a new application, I ran into something I don't think is covered anywhere. It is a X - Y graph. I created four traces each with a basically identical expressions, but different enough to diffentiate. For example: Trace 1: Y = LVDT1 & X = DISTANCE1; Trace 2: Y = LVDT2 & X = DISTANCE2; and so on. When I ran a test, feeding the same signals to all traces, each of the traces was vertically offset from the others, not overlayed as I expected. Is there some feature of DAQFactory Express that causes this and is there so way to control it? Thanks Link to comment Share on other sites More sharing options...
AzeoTech Posted June 11, 2010 Share Posted June 11, 2010 I'd have to see it. Do File - Save with Data and post the resulting .ctl document. It will include the data for the graph. Link to comment Share on other sites More sharing options...
wejsmith Posted June 14, 2010 Author Share Posted June 14, 2010 Sorry -- I over looked a variable that was net getting cleared and causing the offset. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.