paulneal Posted February 17, 2011 Share Posted February 17, 2011 Hi Guys, what would be the easiest way of transmitting data from site back to the office. the data has to come this way as the units on site are behind firewalls. i am looking to send about 12 words of data and then log this back at the office. Paul. Link to comment Share on other sites More sharing options...
AzeoTech Posted February 17, 2011 Share Posted February 17, 2011 Do you have a static IP in the office that is accessible from the remote site? I presume also that you have DAQFactory on both sides? If so, probably the best way is to make the office a Modbus Slave, and the remote a Modbus Master, then use standard Modbus to send the data. If you had more then 12 words, you might want to consider other options, but for such a small amount, this will work fine. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.