kanber Posted May 23 Share Posted May 23 Hello, On one project I have four Modbus TCP devices which are using 502. How can I add these devices to daqfactory with all ports 502. maybe with seq I thougt. But is there any way with adding modbus tcp channels? Quote Link to comment Share on other sites More sharing options...
AzeoTech Posted May 24 Share Posted May 24 I am assuming that all four devices are on separate IP addresses, and that you don't just have 4 devices connected to a single gateway with a single IP: you simply need to create 4 separate devices in DAQFactory using Quick-Device Configuration-New Serial/Ethernet device. Each will have it's own Ethernet Client port, with a different IP, but port # 502, and all will use the Modbus TCP protocol. Give each a different name. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.