mike72

Hi there.

i got a M2M GSM modem and trying to switch a button from 0 to 1 for the moment, then once i get that sorted, i can control others.

For some or other reason the code doesnt change the button state from 0 to 1.

attached is the test2 channel input, and the button input, as well as the .ctl.

mike

M2M(2).ctl

Thank you for the quick reply.

so i did what you suggested and placed 

 button = test2[0] == "Temp"

into the event of the test2 channel and stopped the sequence i was running and it still does'nt change the button state to 1 from a 0.

Any other recommendations?

mike

Good day

i have a serial string coming into a channel, and need the string to control another channel but cant seem to figure it out.

a single word, being "Temp" comes into the serial channel (test2) and is supposed to control another channel by changing the value to 1 when it arrives or 0 when anything else arrives.

can you shed some light on this and how it can be done if possible.

thanks

mike