Hi,
This was the exact thread title I was going to use.
I have a UE9 and a PSL PQube on a network working with DAQ Factory.
I have a "p-Modbustcp 0010: Timeout" Error that comes up sporadically, I haven't figured out why yet.
sometimes I lose the PQube for minutes or more at a time to this error, and sometimes it runs fine.
the ue9 seems to be ok for the most-part but I have a "C1038 Timing lag, data acquisition stalled. Resetting. Timing: 1.000, Offset: 0.000" That comes up sometimes and seems to repeat every ~20sec.
It looks like it occurs when I have lost comms to the PQube.
I am using a sequence to get the LJ channels read because of the speed (2khz), but am still using the "channels" to read the registers from the PQube at 1hz..
please advise.
Thanks.