PaulSn
-
Posts
4 -
Joined
-
Last visited
Posts posted by PaulSn
-
-
ok, what do you think about the modbus dropping on the pqube?
-
ok..
Sorry, I should have mentioned that there are ~5 channels on the LJ that I believe are timed by the sequence and there are ~11 registers being read from the pqube.
how would you advise their timing being adjusted.
I'll attach the .ctlThanks!
-
Hi,
This was the exact thread title I was going to use.
I have a UE9 and a PSL PQube on a network working with DAQ Factory.
I have a "p-Modbustcp 0010: Timeout" Error that comes up sporadically, I haven't figured out why yet.
sometimes I lose the PQube for minutes or more at a time to this error, and sometimes it runs fine.
the ue9 seems to be ok for the most-part but I have a "C1038 Timing lag, data acquisition stalled. Resetting. Timing: 1.000, Offset: 0.000" That comes up sometimes and seems to repeat every ~20sec.
It looks like it occurs when I have lost comms to the PQube.
I am using a sequence to get the LJ channels read because of the speed (2khz), but am still using the "channels" to read the registers from the PQube at 1hz..
please advise.
Thanks.
"p-Modbustcp 0010: Timeout" Error
in Modbus
Posted
I'll turn down the sample rate, should I try to script the read as well?