nhanleduy Posted August 9, 2009 Share Posted August 9, 2009 I really want to simulate Modbus TCP slave for more than 3 ID. Bacause my scada software need this one and can not change inside the software. Please give me some answers Link to comment Share on other sites More sharing options...
AzeoTech Posted August 10, 2009 Share Posted August 10, 2009 I think you can do this. I've never tried. Just create three different devices, all with the same port and same protocol (TCP slave), then in script reassign the ID of each. Note, however, that the Ethernet Server port of DAQFactory only supports one connection at a time. To have three different connections, you would have to create three ports, each with a different IP port. (i.e. 502, 503, 504) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.