andybdjuk Posted January 31, 2010 Share Posted January 31, 2010 Hi, in DaqFactory I have 2 channels, Grid & Inverter, i simply put the channel names in a pie graph and all is well, Grid red, Inverter Green. When 100% of power is from Grid the whole pie chart is red. I also send the same data to Daqconnect and do the same with a pie chart, however although i have checked so many times when 100% grid is being used the Daqconnect pie chart is completly green the oposite to DacFactor as though the colours have been swopped. Andy thoughts Andy Link to comment Share on other sites More sharing options...
AzeoTech Posted January 31, 2010 Share Posted January 31, 2010 When I look at your page, one of the two values is actually 0, so that means that the other, non-zero value would be 100% as expected. I left two variable value controls on the page so you can see. If, for example, you changed the first wedge to cubeip_kw_solar + 0.2 you'll see a proper graph, though your other tag jumps around a bit. Link to comment Share on other sites More sharing options...
andybdjuk Posted January 31, 2010 Author Share Posted January 31, 2010 Thanks, i have added .0001 and that looks good, Completly Red at 100%. I just wondered why i didnt have to do the same the in DacFactory. Andy Link to comment Share on other sites More sharing options...
AzeoTech Posted February 1, 2010 Share Posted February 1, 2010 DAQFactory and DAQConnect are two completely different programs, so things will pretty much always work differently in some way. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.