hema413 Posted August 17, 2010 Share Posted August 17, 2010 I have u3,u9 and ue9pro.I want to interface RS232 with the labjack.Which one is better for implementing serial communication and how to do it. I want to log data send it to the pc through RS232 cable.How to do this. Thank you. Link to comment Share on other sites More sharing options...
AzeoTech Posted August 17, 2010 Share Posted August 17, 2010 The LabJack and RS232 are two completely different systems. You do not (and, I believe, can not, at least easily) do RS232 with a LabJack. You can, however, simply communicate directly with RS232 from DAQFactory. First, however, you will need to upgrade from Express as Express does not support RS232. After you upgrade you'll get documentation on doing serial communications. You'll also need an RS232 port on your computer. Link to comment Share on other sites More sharing options...
hema413 Posted August 19, 2010 Author Share Posted August 19, 2010 I have both DAQ factory ,DAQ factory EXpress and I have a RS232 port om my pc. I want to do the serial communication. How to do this/ kindly help me Link to comment Share on other sites More sharing options...
AzeoTech Posted August 20, 2010 Share Posted August 20, 2010 What protocol? Did you read the DAQFactory Serial/Ethernet guide? Its a pdf document installed with DAQFactory. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.