StartUp Error

[blrooke]

I have a UE9 data logger running DF Base set up monitoring some power and met instruments at a remote location. Up until yesterday it was working fine.

For some reason a timing error started. So we restarted DF and now this startup error trips a timing error constantly. I cannot get the logging program to work.

I have attached our ctl file and the error log that came up when the ctl file was opened.

Any help would be greatly appreciated!

error_log.txt

Halkirk1_August3_2010.ctl

[AzeoTech]

This is a LabJack issue and I've notified them of this post. You may also wish to ask them directly at www.labjack.com. One simple possibility is that someone plugged in a second LabJack. If so, you can't really use D# 0 (first found) because you don't know which one is actually first found.

[LabJackSupport]

Is this an intermittent error, or do you get an error every time you try to talk to the UE9?

I suggest you close all software that might be talking to the UE9. Perhaps reboot your computer to be sure. Then run LJControlPanel and see if you can find the UE9 and bring up the test panel.