andrewjfox Posted March 5, 2012 Share Posted March 5, 2012 Hi, I've got an application that loads the DF file in full screen mode but the whole page is shifted up so that the top 10-20 pixels are off screen. If I use F4 to switch out of full screen and then back it fixes the problem. I've tried starting full screen mode using both internal document setting and -f flag and both have the problem. Is this a DF issue or a quirk of Win7? I've got the developer licence but the application is running on target machine with runtime only Regards Andrew Link to comment Share on other sites More sharing options...
AzeoTech Posted March 5, 2012 Share Posted March 5, 2012 I'm afraid its a DF issue. To fix, simply select all, then hit Shift-Down arrow twice to shift the entire page permanently down. Link to comment Share on other sites More sharing options...
andrewjfox Posted March 6, 2012 Author Share Posted March 6, 2012 Thanks for quick response. FYI 2 x shift down was too far 1 x shift down quite far enough, but better and workable Seems like a known issue, but I couldn't find any posts in the forum. Is there a fix pending in any up coming releases? Andrew Link to comment Share on other sites More sharing options...
AzeoTech Posted March 6, 2012 Share Posted March 6, 2012 Its kind of a hard one to fix, but hopefully should be looked at when we migrate compilers (which we are doing now). You can use just Down to move by one pixel. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.