bilkoboyo Posted November 16, 2012 Share Posted November 16, 2012 Hi, New to this, usually just do screens whichs is much!!!!!!!!!!!!!!!!!! easier so I read an array from PLC DM100 to DM109 and can display any element with it so Array [0] [5] shows real time value of DM105 If I want to change this value and write it back to PLC from a variable value box what is Syntax thanks Jim Link to comment Share on other sites More sharing options...
AzeoTech Posted November 16, 2012 Share Posted November 16, 2012 Depends. The easiest way is typically to create an output channel, and then just do myChannel = 5 or whatever. It depends on what protocol you are using. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.