jerzydziewierz Posted May 10, 2016 Share Posted May 10, 2016 Hello, I have DAQFactory Developer licensed by a hardware key, it works OK for us, but now need to move the dev machine to a different place, which has a Windows 7 enterprise inside a VMWare. I have selected the hardware key option specifically for that occasion. The VMWare connects the driver to the internal machine no problem, but then Windows 7 says it needs a driver for the new device. Where can I get it from, or more specifically, which exact one do I have to install? https://www.cryptoken.com/en/support/downloads offers a number of drivers, but it is unclear which device do I have. Hardware IDs are: USB\VID_0D7A&PID_0001&REV_0203 USB\VID_0D7A&PID_0001 Link to comment Share on other sites More sharing options...
jerzydziewierz Posted May 10, 2016 Author Share Posted May 10, 2016 1 hour ago, jerzydziewierz said: The VMWare connects the driver to the internal machine no problem, but then Windows 7 says it needs a driver for the new device. I meant, "VMWare connects the hardware key (via USB) to the internal, virtual machine no problem, and the Windows7 inside VM recognizes the device. It does not recognize where to get the device driver from tough - as shown in the screenshot above. Link to comment Share on other sites More sharing options...
AzeoTech Posted May 11, 2016 Share Posted May 11, 2016 For the silver keys, you want to go here: https://www.marx.com/en/support/downloads Click on Driver and Diagnostic Tools, then select CBUSetup (the second item listed) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.