Mixergy Posted May 19, 2017 Share Posted May 19, 2017 Hi Guru, I have setup the DF with control a PLC for continuous testing which would last for two weeks. During the test DF has the Modbus Port Lock warning every now and then, and sometimes completely locked down the port (as shown in the attachment) and pause the test. Is there a way that I can get an email reminder or text message if this occurs? I know we can use DAQconnect to observe real time data but not sure if realtime warning could be done? Many thanks. Ren Link to comment Share on other sites More sharing options...
AzeoTech Posted May 19, 2017 Share Posted May 19, 2017 You are likely getting port locked errors because you have different Offset values for your input channels. As for sending an email, you can do that in many versions of DAQFactory. Use the OnAlert system event to detect the messages going to command / alert. You'll want to add some logic so it doesn't send you an email with EVERY message, or you will get inundated with messages. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.