jtorrecampo Posted January 28, 2015 Share Posted January 28, 2015 Does DAQ Factory supports Mitsubishi Protocols such as CC Link or SSCNET to communicate directly to an MR-J3 servo amplifier? Link to comment Share on other sites More sharing options...
AzeoTech Posted January 28, 2015 Share Posted January 28, 2015 Unlikely. DAQFactory supports FX and Melsec A protocols, though not actively. You would likely need to use an OPC server for this device. Link to comment Share on other sites More sharing options...
SteveMyres Posted January 28, 2015 Share Posted January 28, 2015 Check and see if it does Modbus. Many drives do and Modbus is very well supported on DAQ Factory. I know Mitsubishi VFDs will do Modbus, so it wouldn't surprise me if the servos do too. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.